Devon TRF Group Forum

Members Login
Username 
 
Password 
    Remember Me  
Devon TRF Group Open Forum -> General Discussion Board -> Vibration white finger - any ways to reduce vibration through my bars?
Post Info TOPIC: Vibration white finger - any ways to reduce vibration through my bars?
james anderson


Clubman B

Status: Offline
Posts: 113
Date:
Vibration white finger - any ways to reduce vibration through my bars?
Permalink  

i managed to damage my hands at work recently and have got to try and reduce the things that trigger them going numb or getting pins and needles to the point i can not hold things is there any way of reducing the amount of vibration through the bars on my wr. I've not ridden many other enduro bikes so not sure if changing my bike will help 



__________________
Jeff


Clubman B

Status: Offline
Posts: 483
Date:
viabration white finger any ways to reduce viabration through my bars
Permalink  

Palm savers might help, they are neoprene insert that go under gloves

__________________
TTR


Powermonger!!

Status: Offline
Posts: 7906
Date:
Permalink  

Bar end weights are supposed to reduce vibes James.

https://forum.motorcyclenews.com/topic/61380/what-do-bar-ends-do/3



__________________

Exeter area - Devon TRF Group member

http://www.ttr250.com     

http://ttr250.activeboard.com/ - THE forum for TTR250 owners
Biff


Expert

Status: Offline
Posts: 1850
Date:
Permalink  

Fasst flexx bar inserts

Not tried them though



__________________

GG Red     4 strokes good, 2 strokes better

 

Complexity is the enemy of reliability

 
Albert


Clubman A

Status: Offline
Posts: 604
Date:
Permalink  

could give foam rally grips a go

 

http://www.adventure-spec.com/default/handlebar-progrip-foam-rally-grips.html

 

these are also designed to reduce vibes apparently:

 

http://www.adventure-spec.com/default/pro-taper-pillow-top-grips-2947.html

 

it might also be worth trying bar risers, so you can avoid pressing your weight down through your hands



-- Edited by Albert on Tuesday 27th of June 2017 08:52:23 PM

__________________
Trevor Foxon


Expert

Status: Offline
Posts: 1604
Date:
Permalink  

I have heard that if you fill the bars with silicone it helps loads, might have been on here I saw it.



__________________
RichT4


Champion

Status: Offline
Posts: 4695
Date:
Vibration white finger - any ways to reduce vibration through my bars?
Permalink  

Silicone sealant pumped through the whole inside of the bars seems to help. It's cheap to do so worth a try. I filled my renthals on my drz and afterwards was tempted to do it to my road bike too.



__________________
devondan


Champion

Status: Offline
Posts: 4644
Date:
viabration white finger any ways to reduce viabration through my bars
Permalink  

If you have white finger ( if you haven't already) you aught to think about seeing a solicitor, unless you work for yourself! No one should be injured at work.



-- Edited by devondan on Wednesday 28th of June 2017 05:23:25 AM

__________________

Don't trust atoms, they make up everything! 
Jerry atterick


Expert

Status: Offline
Posts: 1668
Date:
Permalink  

Cheaper and better fill bars with sand, leave an inch empty, and let some water soak in, not runny, just damp.
It seriously dampens the vibration.
Bar ends, as in 1930s car bumpers, change the resonant frequency of oscillations of the bumpers which used to be transmitted to the bodyshell of the car and more importantly stopped the wings from cracking. (How do I know this - you need a VERY large anorak)
You can get rubber mounts for the bars, vary from bike to bike.


__________________
doug9270


Powermonger!!

Status: Offline
Posts: 7264
Date:
Permalink  

My advise is look at your riding style, i would say you are gripping to hard. You might need to change the height or the bend of the bars.

__________________

Took the Queens Shilling and disappeared for 23 Years !!
Biff


Expert

Status: Offline
Posts: 1850
Date:
Permalink  

Checked engine mounts?



__________________

GG Red     4 strokes good, 2 strokes better

 

Complexity is the enemy of reliability

 
Jerry atterick


Expert

Status: Offline
Posts: 1668
Date:
Permalink  

Does sound like too much tension with, maybe, a mechanical issue.

__________________
Nige


Expert

Status: Offline
Posts: 1922
Date:
Vibration white finger - any ways to reduce vibration through my bars?
Permalink  

Loads of good suggestion.
You could also try oversized or heated grips,. suspension settings, wheel balancing.
Personally I've always found 4 cylinder Yamaha road bikes to be a bit buzzy, but I've not rode a WR for any long periods.

__________________

CO2 more slippery than prison soap!
Pete


Expert

Status: Offline
Posts: 1048
Date:
Permalink  

doug9270 wrote:

My advise is look at your riding style, i would say you are gripping to hard. You might need to change the height or the bend of the bars.

 Doug has a point. Make sure your riding stance is correct. Stand on the pegs and grip the bars lightly. If you are happy to cup the bars between your fingers without needing to hold the bars for balance and you back feels relaxed then you have it about right. If you are tensing when riding then it may cause pressure on the discs between vertebra in the neck and subsequent swelling may press on the nerves to the fingers causing numbness and pins and needles. When I put risers on the CCM these symptoms went away.



__________________
james anderson


Clubman B

Status: Offline
Posts: 113
Date:
Permalink  

thanks for all the ideas i know i.m to tense the first ten or fiften minutes on the bike always takes me a few lanes to get settled on the bike. the bike is bike is mecanicly sound its not vibrating an abnormaly amount but enough to trigger my hand after damaging them usings sanders and multitools for to long in one day i.m back to the doctors next week but there is no cure just ways to prevent it getting any worse.

i.ve changed the clutch leaver to an easy lever and that has helped but still not enough my bars are the right height for me but do have to much bend in which i
ve been wanting to change but not got around to i think i.ll order some new bars and try and fill them before input them on it seems to be the frequany of the vibration more than amount of which ist the problem so hopefuly this will make a differance as i really dont want to give uo riding

__________________
james anderson


Clubman B

Status: Offline
Posts: 113
Date:
Permalink  

not been properly out on the bike yet but did manage to do 50 miles on the road and a few laps of a field after adding silicone to the bars without setting my hands next to try it on the lanes

__________________
wysiwug


Clubman B

Status: Offline
Posts: 407
Date:
Permalink  

Just got myself PHDS mounts to help with knackered wrists, 1st trip was Sunday.. Absolutely Brilliant.

Got yellow (Standard) rubbers at the mo, but going to get green (Softer) shortly.

 



Attachments
__________________

I really hope thats just mud!
jt


Powermonger!!

Status: Offline
Posts: 8136
Date:
Permalink  

Trevor Foxon wrote:

I have heard that if you fill the bars with silicone it helps loads, might have been on here I saw it.

 Yep I did it on my old 2T KTM and worked well...



__________________

'4 wheels move the body - 2 wheels move the soul'
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Devon TRF Group Open Forum -> General Discussion Board -> Vibration white finger - any ways to reduce vibration through my bars?


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard