Devon TRF Group Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Trailer wheels to suit 60mm hubs with 100mm PCD


Champion

Status: Offline
Posts: 4679
Date:
Trailer wheels to suit 60mm hubs with 100mm PCD


As the title says.

Current wheels are 8" and have 4.80/4.00-8  tyres fitted.

So I'm looking for either a pair of wheels & tyres of any size (as long as they will fit those hubs), or a pair of rims that will fit the hubs and those tyres.

Anyone got any sat in their garage before I go buy new ones?

 

 

 



__________________


Champion

Status: Offline
Posts: 4629
Date:

Rich
I seem to remember buying 2 with tyres on was almost as cheap as buying two tyres - from WTA in Exeter but it was a few years ago.
Dan

__________________

Don't trust atoms, they make up everything! 



Champion

Status: Offline
Posts: 4679
Date:

Hi Dan

I have the tyres and tubes, though fresh ones would be better.
Problem I have is the rims have rotted out due to sitting outside for many years so I really just need new rims.

Rims are about £12 each whilst full wheels are around £25 each.. not a massive amount but this is a pretty basic & low value trailer so I'm 50/50 whether to refurb it or scrap it.

__________________


Novice

Status: Offline
Posts: 22
Date:

I have a pair of trailer wheels here.
Not brilliant but fairly solid.

Will get a picture of them later for you.
If any use then you can have them for free.

(Collected from willand)


__________________


Champion

Status: Offline
Posts: 4679
Date:

Hi Ian

That would be great, would they fit my hubs (60mm with 100mm PCD)?



__________________


Novice

Status: Offline
Posts: 22
Date:

Looks to be 100mm pcd but closer to 64mm hub centre. 

Could do with a wire brush and repaint but still holding air.


If you message me your number I will forward through a couple of pictures via whatsap or similar. 



__________________


Devon's Best

Status: Offline
Posts: 3250
Date:

Rich, do they have the cutout for a grease nipple, if so these tend to be imperial and 102mm. 

 



__________________

 

KTM Sunday = ATM Monday 

DTRF kd101146eb



Champion

Status: Offline
Posts: 4679
Date:

The current wheels do have a cut out for the grease nipple so I guess I'd better take one of the wheels off and measure the hub properly.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard