Devon TRF Group Forum

Members Login
Username 
 
Password 
    Remember Me  
Devon TRF Group Open Forum -> Wanted -> Easy out/stud extractor
Post Info TOPIC: Easy out/stud extractor
doug9270


Powermonger!!

Status: Offline
Posts: 7265
Date:
Easy out/stud extractor
Permalink  

Anybody got a set of easy outs i could borrow for a quick job, damn airbox box cover screw on the small xr very tight probably never been removed since new. furiousfurious

can collect near to honiton otherwise eblag again a wait for days.



__________________

Took the Queens Shilling and disappeared for 23 Years !!
Jerry atterick


Expert

Status: Offline
Posts: 1668
Date:
Permalink  

Hate easyouts!

Is the screw broken off in plastic case or is it in steel?

If steel, mig weld washer to broken bit, down the hole if need be.

The heat etc with good vice grips will remove nicely.

Might need doing a couple of times, high success rate, clean threads after etc

From my experience easy out process generally spoils or destroys main bit

 



__________________
salcomberider


Clubman B

Status: Offline
Posts: 380
Date:
Permalink  

ive got a set if you want to borrow them but im down in salcombe?

__________________
Nige


Expert

Status: Offline
Posts: 1922
Date:
Permalink  

Drill it out with a left handed drill bit.

__________________

CO2 more slippery than prison soap!
Jimmer69


Novice

Status: Offline
Posts: 24
Date:
Permalink  

Doug,

I have got couple of sets that you can borrow. I am in Rockbeare if that is any good and you can collect tonight.

Pm me if interested.

....Jim

__________________
doug9270


Powermonger!!

Status: Offline
Posts: 7265
Date:
Permalink  

Hi Jim, thanks. Are you about tomorrow ? as its a little late now.

__________________

Took the Queens Shilling and disappeared for 23 Years !!
doug9270


Powermonger!!

Status: Offline
Posts: 7265
Date:
Permalink  

Jerry atterick wrote:

Hate easyouts!

Is the screw broken off in plastic case or is it in steel?

If steel, mig weld washer to broken bit, down the hole if need be.

The heat etc with good vice grips will remove nicely.

Might need doing a couple of times, high success rate, clean threads after etc

From my experience easy out process generally spoils or destroys main bit

 

 The screw is in the plastic air box cover so cannot apply any heat whatsoever, the other 3 undid no problem !!

Cannot get near it with any type of grip either as top of air box tight to the frame.



__________________

Took the Queens Shilling and disappeared for 23 Years !!
Jimmer69


Novice

Status: Offline
Posts: 24
Date:
Permalink  

Doug,

See PM

...Jim

__________________
Jerry atterick


Expert

Status: Offline
Posts: 1668
Date:
Permalink  

Sounds like - No choice
Best of luck.
Ive got easyouts, near Tedburn, which you are welcome to borrow

__________________
doug9270


Powermonger!!

Status: Offline
Posts: 7265
Date:
Permalink  

Thanks Jerry, Tim near me has come to the rescue.

__________________

Took the Queens Shilling and disappeared for 23 Years !!
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Devon TRF Group Open Forum -> Wanted -> Easy out/stud extractor


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard