Devon TRF Group Forum

Members Login
Post Info TOPIC: Husqvarna TE310 'FAIL'


Clubman B

Status: Offline
Posts: 351
Date:
Husqvarna TE310 'FAIL'


My husky is refusing to start with FAIL appearing and staying on the computer! In the manual they say it is a fuel injection problem - has anyone else encountered this problem or something similar? Does the bike need to plugged into some software for a 'health-check'?  Where is the best place to go- I live in Bude!

THANKS



__________________

Husky power...ruff ruff!!

jt


Powermonger!!

Status: Offline
Posts: 7999
Date:

Can you hear the fuel pump running?

__________________

'4 wheels move the body - 2 wheels move the soul'



Devon's Best

Status: Offline
Posts: 3402
Date:

Is the battery okay, as JT said if the battery is even slightly low then it won't prime the FIP

__________________

Culmstock area - Devon TRF Group member - KTM 690 Enduro



Clubman B

Status: Offline
Posts: 351
Date:

Hi, thanks for the advice! Just checked the battery and it's fine! The fuel pump is not running at all! Turn the key and there is only a 'click'! Would be perfect if it was an easy fix! Not keen on transporting it too Thor or St. Blazey!



-- Edited by Crocker on Tuesday 3rd of March 2015 08:19:02 PM

__________________

Husky power...ruff ruff!!



Devon's Best

Status: Offline
Posts: 3402
Date:

Could still be a cell in a battery failed. Check O2 Resistor plug (under Tank) . Remove and clean contacts, try again . Only needs moisture in a sensor connection to trigger "Fail" . Could also be a fuel pump failure

Read this as well:

www.thumpertalk.com/topic/1097765-te310-just-cut-out-wont-start/


__________________

Culmstock area - Devon TRF Group member - KTM 690 Enduro



Clubman B

Status: Offline
Posts: 351
Date:

Thanks again! Is it a difficult job to check the o2 resistor plug, as I am useless when it comes electrics etc?

__________________

Husky power...ruff ruff!!



Devon's Best

Status: Offline
Posts: 3402
Date:

Just clean the contacts and check for any moisture



__________________

Culmstock area - Devon TRF Group member - KTM 690 Enduro



Clubman B

Status: Offline
Posts: 351
Date:

Have you pic of the o2 sensor please?


__________________

Husky power...ruff ruff!!



Devon's Best

Status: Offline
Posts: 3402
Date:

post-377885-0-50129900-1406854227.jpg



__________________

Culmstock area - Devon TRF Group member - KTM 690 Enduro



Clubman B

Status: Offline
Posts: 351
Date:

Thanks! Did all bikes come fitted with these as I cant find mine haha!!??

__________________

Husky power...ruff ruff!!



Clubman B

Status: Offline
Posts: 380
Date:

there is a sensor on the back of the engine, check that the contacts on that are clean cause that will shut the system down.

__________________


Clubman B

Status: Offline
Posts: 351
Date:

I really appreciate all the help! If push comes to shove, where is the best place to take the bike for diagnostics etc?

__________________

Husky power...ruff ruff!!



Clubman B

Status: Offline
Posts: 380
Date:

i use Justin Gibbs Saltash or you have Thor in Bodmin

__________________


Powermonger!!

Status: Offline
Posts: 6754
Date:

Have you checked all of the fuses, on my 449 there was a hidden fuse which had come loose stopping the ignition/pump system working.

__________________

Took the Queens Shilling and disappeared for 23 Years !!



Clubman B

Status: Offline
Posts: 351
Date:

I've checked all the fuses! Would have been ideal if one had blown - nice quick fix! Phoned Thor, bloke on the phone seemed really helpful! Are they any good? Never used them before!

__________________

Husky power...ruff ruff!!



Powermonger!!

Status: Offline
Posts: 6754
Date:

Not used them personally but they are/were husky dealers so should be in good hands.

__________________

Took the Queens Shilling and disappeared for 23 Years !!



Expert

Status: Offline
Posts: 1827
Date:

Find an Ibeat software download and make a cable up.

__________________

CO2 more slippery than prison soap!



Champion

Status: Offline
Posts: 4529
Date:

I used Thor for my Gasgas , they were very helpful and sorted out the ecu prob with minimal fuss.

Dan

__________________

Don't trust atoms, they make up everything! 



Devon's Best

Status: Offline
Posts: 3402
Date:

Is this of any help?

www.endurofactory.nl/pdfs/2012/2012_WSM_TC-TXC-TE250-310.pdf

__________________

Culmstock area - Devon TRF Group member - KTM 690 Enduro



Clubman B

Status: Offline
Posts: 351
Date:

Many thanks for the detailed manual! I've dropped the bike off at Thor as I am utterly useless when it comes to mechanics! Thanks again!

__________________

Husky power...ruff ruff!!

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard