Having got a puncture recently I decided to get a new tyre and innertube. Upon removing the protective tape from the inner rim i noticed some corrosion that i deem unsafe. Time for a new rim. Its an 96 XR400 and i suspect its the original.
Do most people send them off? I would be keen to have a go myself if the opportunity presented itself. I'm based in Willand.
I used the Devon rim company now operating from Crediton recently and was very happy with the rim and the service. I am not sure the Devon Rim Company do Ali rims.
Somerset TRF have an account with Talon and can get their rims at a reasonable price. I really enjoy building wheels I find it very satisfying getting them laced and trued. A cheap wheel balancing stand makes it easier.
Like for like, the job is straightforward. You're welcome to visit. I've been through the same process, done several over the years. I build my own wheels, powder coat my hubs and have a really good spoke supplier in Ying Tong 4mm good quality (really been tested!), 21" front set and 18" different length side for side set delivered £53 all in. I wanted Crediton chap to do my first set. He really knows what he's about, but doesn't suffer fools gladly - I was that fool until I got through. I wanted to build my own, but needed to buy his spokes. "You won't be able" and the price was prohibitive (for me). So I HAD to learn, built the jigs and, tentatively, have a go. Pm me if you want some hints, suppliers etc.
-- Edited by Jerry atterick on Wednesday 30th of October 2024 06:43:44 PM
