Devon TRF Group Forum

Corky · Corky

Biff · Biff

Want to try one ,where's cheapest deal Ta

philsil · philsil

Smith didn't see you at camouflage trail riding this morning Thank you Sarge -- Edited by doug9270 on Tuesday 21st of May 2013 10:27:20 AM

jt · jt

Then how about doing this to it

devondan · devondan

I need a new needle jet (Q-0) for my new YZ does any one know where I can get them locally or quickly? I usually use Allen's Performance but quick they aint! Cheers Dan

TTR · TTR

Just a heads up that a link to the mag was circulated via email last Wednesday so if you are a member and haven't seen the email it may be worth emailing the memsec[@]trf.org.uk

bombx3 · bombx3

At last and Thanks to Pete Bull for helping to unload the beast , also not forgetting giving it a test ride! -- Edited by bombx3 on Sunday 26th of May 2013 02:38:51 PM -- Edited by bombx3 on Sunday 26th of May 2013 02:45:30 PM

DR Sean · DR Sean

Dear All Hi ya, I've just acquired a 1980 Yamaha DT125MX with a 175 engine. It has a number of good things.... I think, the engine seems fine, frame has been refurbed and powder coated. rear shock seem fine. Carb is knacked so have ordered a new one. there are lots of non standard parts, including no clock...

shack · shack

Hi all, maybe this should be in the 'wanted section' but after somehere reasonably local (Exeter-ish) that can make up brake lines, I guess I'm saying while u wait, so they could come and have a look and so I don't order the wrong ones lol, I usually use motorworks (it's for a BMW F650GS) and they are havi...

Simmo · Simmo

http://www.f1fanatic.co.uk/2013/05/01/motor-sport-marshal/

RichT4 · RichT4

I haven't ridden it for while and might take a look tomorrow. Has anyone ridden it recently, if so what it's like after recent rains?

Fixer · Fixer

Hello everyone In May of this year I will be setting off to do an Around the World trip on my Yamaha XT600E. Due to a clash of calendars with my brother, he wants to take 5 months and I can only afford 3.5, I will be doing this solo. For those of you that do not know...I was the idiot that took a Ural Cross Sidecar...

RichT4 · RichT4

anybody?? East to west would be my intended direction.

bombx3 · bombx3

Just seen a picture of the new Beta Alp 200 ,has any one had one of these ? They look good for the Tricky Devon Lanes ,im finding my ultra modern bike is more suited to mx tracks or fire breaks

jt · jt

RichT4 · RichT4

This is for the wheel bolts on my T4 van... Somewhere along the way I sprayed all of my wheel bolts with copper grease to stop them being so tight to undo.I now have a torque wrench (so no more guess work) and was going to put my rear wheels back on and realised I didn't have the torque value (which I do now - 1...

D13dkt · D13dkt

I've been thinking abobuy changeing the bike and I a big Honda fan at heart, I'm just wondering if anyone uses or has any tips on the xr650. i know they are a big bike and kick only but I could cope with that I think. any views to hints will be great.

Wheely · Wheely

Just heard a classic tale from an x work colleague of mine. A few months back he paid over £4k to a plumber to install a whole new bathroom in his house. The plumber that did it was crap and in the end the whole lot virtually needed doing again. He tried and tried to contact the rogue plumber but he wasn't ans...

LostSparkie · LostSparkie

If you arrive at a lane that has no signposts for a tro, Can you ride it regardless? Basically I came to a lane earlier as I went into it there was a laminated sign from a trials club saying that the lane was in use on 31st march with permission from the relevant authorities, Which made me think that there was...

Harty · Harty

http://www.ktmforum.co.uk/bikes-bits-sale/158221-sat-map-bits.html

delvey91 · delvey91

Where can i get a sheet in exeter? Need some 3mm and roughly 2m square also need some ali box section and angles

shack · shack

Hi All, I don't need it just yet but might soonish, it farts when I get on it occasionally (no oil weeping) and not me farting, I haven't felt it bottoming out at all and did wonder if it was my seat but if I push the rack / back end it does make a slightly windy whisper So roughly what pennies might I be lookin...

Wheely · Wheely

I am in a dilemma. I love my KTM200 to bits and the ride is unbelievable fun. However I suffer from more pains in my right arm/shoulder since having the 2T - compared with my WRs before. I have had a bad right shoulder for many years - think it was from an old taikwondo pad training injury (Was holding a kic...

Simmo · Simmo

http://www.ebay.co.uk/itm/SUZUKI-RGV-250M-CR-500-SPECIAL-PROJECT-/181140592592

doug9270 · doug9270

The year 2013 will be remembered in motorcycling history as the year that Husqvarna was reborn.Husqvarna Starts a new era of great success:Following the acquisition of Husqvarna by Pierer Industries AG and after careful analysis and evaluation of all aspects, it was decided to reunite what cam...

chriscole · chriscole

I had a conversation with PC Wallace this afternoon, he is planning to try and intercept riders that are apparently riding on Mutters Moor and East Hill Strips mainly on Sunday afternoons. If the word can be passed around to let riders know they are likely to get there collars felt if they are found dev...

LostSparkie · LostSparkie

So as a new paid up member of the trf how do I get the map overlays for devon? Went down one earlier only to find what I thought were puddles are more like ponds and as deep as my seat Got very wet I did

Hoops · Hoops

The article says it all really: http://www.bbc.co.uk/sport/0/motorsport/22265878 -- Edited by TTR on Wednesday 15th of May 2013 06:57:26 AM

Corky · Corky

After spending Monday afternoon meandering along the lanes of North Devon with Moggsy and Jim, we ended up at the top of 180-082 with views over towards Exmoor. Proper job...

Simmo · Simmo

http://www.ebay.co.uk/itm/Norton-H-D-Harton-Norley-Harley-Davidson-Cafe-Racer-Special-/321115918580

Topic		Started By	Replies	Views	Last Post
	Moggsy Contemplates The Meaning Of Life (Preview)	Corky	3	644	May 30, 2013 by Corky
	Mitas co2 rear (Preview) Want to try one ,where's cheapest deal Ta	Biff	2	525	May 30, 2013 by Biff
	2WD bike (Preview) Smith didn't see you at camouflage trail riding this morning Thank you Sarge -- Edited by doug9270 on Tuesday 21st of May 2013 10:27:20 AM	philsil	9	762	May 30, 2013 by hoc
	Got an old Monster? (Preview) Then how about doing this to it	jt	0	494	May 29, 2013 by jt
	Mikuni parts (Preview) I need a new needle jet (Q-0) for my new YZ does any one know where I can get them locally or quickly? I usually use Allen's Performance but quick they aint! Cheers Dan	devondan	3	519	May 29, 2013 by Gasgas23
	TRF - TRAIL magazine for May 2013 (Preview) Just a heads up that a link to the mag was circulated via email last Wednesday so if you are a member and haven't seen the email it may be worth emailing the memsec[@]trf.org.uk	TTR	0	455	May 27, 2013 by TTR
	My New Bike (Preview) At last and Thanks to Pete Bull for helping to unload the beast , also not forgetting giving it a test ride! -- Edited by bombx3 on Sunday 26th of May 2013 02:38:51 PM -- Edited by bombx3 on Sunday 26th of May 2013 02:45:30 PM	bombx3	9	722	May 27, 2013 by jt
	Yamaha DT125/175 mongrel (Preview) Dear All Hi ya, I've just acquired a 1980 Yamaha DT125MX with a 175 engine. It has a number of good things.... I think, the engine seems fine, frame has been refurbed and powder coated. rear shock seem fine. Carb is knacked so have ordered a new one. there are lots of non standard parts, including no clock...	DR Sean	5	760	May 25, 2013 by DR Sean
	While u wait brake lines (Preview) Hi all, maybe this should be in the 'wanted section' but after somehere reasonably local (Exeter-ish) that can make up brake lines, I guess I'm saying while u wait, so they could come and have a look and so I don't order the wrong ones lol, I usually use motorworks (it's for a BMW F650GS) and they are havi...	shack	9	1064	May 24, 2013 by shack
	British Motorsport Marshals Club (Preview) http://www.f1fanatic.co.uk/2013/05/01/motor-sport-marshal/	Simmo	1	490	May 24, 2013 by chrisoncbr
	what 192-237 like nowadays? (Preview) I haven't ridden it for while and might take a look tomorrow. Has anyone ridden it recently, if so what it's like after recent rains?	RichT4	7	676	May 24, 2013 by Hoops
	Andy Around the World 2013 (Preview) Hello everyone In May of this year I will be setting off to do an Around the World trip on my Yamaha XT600E. Due to a clash of calendars with my brother, he wants to take 5 months and I can only afford 3.5, I will be doing this solo. For those of you that do not know...I was the idiot that took a Ural Cross Sidecar...	Fixer	8	1050	May 24, 2013 by jt
	what is 192-265 like nowadays? (Preview) anybody?? East to west would be my intended direction.	RichT4	6	578	May 24, 2013 by jt
	Beta Alp 200 (Preview) Just seen a picture of the new Beta Alp 200 ,has any one had one of these ? They look good for the Tricky Devon Lanes ,im finding my ultra modern bike is more suited to mx tracks or fire breaks	bombx3	9	7686	May 23, 2013 by Laserman
	They make it look so easy..... (Preview)	jt	3	622	May 22, 2013 by jt
	Torque de-rating for grease thread? (Preview) This is for the wheel bolts on my T4 van... Somewhere along the way I sprayed all of my wheel bolts with copper grease to stop them being so tight to undo.I now have a torque wrench (so no more guess work) and was going to put my rear wheels back on and realised I didn't have the torque value (which I do now - 1...	RichT4	24	1367	May 22, 2013 by RichT4
	Xr650 (Preview) I've been thinking abobuy changeing the bike and I a big Honda fan at heart, I'm just wondering if anyone uses or has any tips on the xr650. i know they are a big bike and kick only but I could cope with that I think. any views to hints will be great.	D13dkt	8	866	May 22, 2013 by Devon_Rich
	Up Yours Rogue Trader (Preview) Just heard a classic tale from an x work colleague of mine. A few months back he paid over £4k to a plumber to install a whole new bathroom in his house. The plumber that did it was crap and in the end the whole lot virtually needed doing again. He tried and tried to contact the rogue plumber but he wasn't ans...	Wheely	1	683	May 22, 2013 by jacks
	TRO? (Preview) If you arrive at a lane that has no signposts for a tro, Can you ride it regardless? Basically I came to a lane earlier as I went into it there was a laminated sign from a trials club saying that the lane was in use on 31st march with permission from the relevant authorities, Which made me think that there was...	LostSparkie	5	553	May 22, 2013 by LostSparkie
	Satmap and full OS mapping for £225 (Preview) http://www.ktmforum.co.uk/bikes-bits-sale/158221-sat-map-bits.html	Harty	4	1060	May 20, 2013 by Harty
	Ali Chequer plate (Preview) Where can i get a sheet in exeter? Need some 3mm and roughly 2m square also need some ali box section and angles	delvey91	1	672	May 20, 2013 by Lost
	shock rebuilds Exeter recommendations (Preview) Hi All, I don't need it just yet but might soonish, it farts when I get on it occasionally (no oil weeping) and not me farting, I haven't felt it bottoming out at all and did wonder if it was my seat but if I push the rack / back end it does make a slightly windy whisper So roughly what pennies might I be lookin...	shack	3	565	May 20, 2013 by shack
	2T vs 4T vs arm/shoulder pain (Preview) I am in a dilemma. I love my KTM200 to bits and the ride is unbelievable fun. However I suffer from more pains in my right arm/shoulder since having the 2T - compared with my WRs before. I have had a bad right shoulder for many years - think it was from an old taikwondo pad training injury (Was holding a kic...	Wheely	19	1133	May 20, 2013 by KronreifTrunkenpolzMattighofen
	RGV250/CR500 looks like fun (Preview) http://www.ebay.co.uk/itm/SUZUKI-RGV-250M-CR-500-SPECIAL-PROJECT-/181140592592	Simmo	10	1008	May 18, 2013 by maggotman
	Husqvarna/Husaberg lives on in its own right ! (Preview) The year 2013 will be remembered in motorcycling history as the year that Husqvarna was reborn.Husqvarna Starts a new era of great success:Following the acquisition of Husqvarna by Pierer Industries AG and after careful analysis and evaluation of all aspects, it was decided to reunite what cam...	doug9270	2	695	May 17, 2013 by doug9270
	Riding on Mutters Moor near Sidmouth and East Hill strips (Preview) I had a conversation with PC Wallace this afternoon, he is planning to try and intercept riders that are apparently riding on Mutters Moor and East Hill Strips mainly on Sunday afternoons. If the word can be passed around to let riders know they are likely to get there collars felt if they are found dev...	chriscole	10	1652	May 17, 2013 by doug9270
	How to get map overlays (Preview) So as a new paid up member of the trf how do I get the map overlays for devon? Went down one earlier only to find what I thought were puddles are more like ponds and as deep as my seat Got very wet I did	LostSparkie	2	536	May 15, 2013 by LostSparkie
	Inspirational (Preview) The article says it all really: http://www.bbc.co.uk/sport/0/motorsport/22265878 -- Edited by TTR on Wednesday 15th of May 2013 06:57:26 AM	Hoops	3	499	May 15, 2013 by Simmo
	View From 180-082 (Preview) After spending Monday afternoon meandering along the lanes of North Devon with Moggsy and Jim, we ended up at the top of 180-082 with views over towards Exmoor. Proper job...	Corky	1	497	May 15, 2013 by shack
	Norton H-D. Harton, Norley, Harley Davidson, Cafe Racer (Preview) http://www.ebay.co.uk/itm/Norton-H-D-Harton-Norley-Harley-Davidson-Cafe-Racer-Special-/321115918580	Simmo	2	823	May 14, 2013 by gaschef
«First < 1 … 83 84 85 86 87 … 151 > Last» \| Page of 151 sorted by